Scan the QR code for technical support.
Product Introduction
ZK-T30A-1 film protective film is designed to protect printed circuit boards from scratches and chemical solvents that may occur during use and cleaning. It features a large protective layer that is thin, clear, and allows for strong light transmission. Furthermore, it can be easily applied to various protective film laminating equipment. This product consists of a highly transparent PET film, a strong adhesive layer, and a smooth polyester stretch diaphragm.
Product Specifications
| Serial Number | Film thickness | Thickness of adhesive | Adhesion level | characteristic |
| 1 | 6.0 µm | 4 µm | 250 gm/li | Glossy finish, can be used for marking, can be covered with tape (for internal/external solder mask). |
| 2 | 6.0 µm | 5 µm | 250 gm/li | Glossy finish, suitable for marking, and can be covered with tape (for wiring). |
| 3 | 6.0 µm | 5.2 µm | 300 gm/li | Glossy finish, can be used for marking, can be applied with tape, thicker adhesive layer can reduce air bubbles after lamination. |
Transportation and storage
Transported as general cargo.
Store at room temperature.
Avoid direct sunlight and high heat.
Warranty period: 12 months.
Use clean trucks for transportation. Each package should not be stacked more than three layers high, and the bottom layer should be secured with a non-slip pallet to prevent squeezing, deformation, or tipping.
相关推荐
WeChat official account
